Wheel ONLY for Ashford Traditional
The wheel ONLY for an Ashford Traditional to suit single/scotch or double drive models. Bare timber.
You can now replace that one that has come apart at the hub....the axle hole is aligned to the rear of the hub, so best to check your axle first as the hole may be too far forward (middle of the hub)....if so you will need a new axle as well.
Now, if you have one of the older models with a bolt at the end of the axle, you may need a new pitman as well as the new axle....and if you need a new pitman, your connector will be different...best to call Peter and have a word with him!